Installation Accessories
Cold Cure Adhesive and Activator
Excel Cold Cure Adhesive and Activator pack can be used to terminate approximately 200 ST or SC connectors
Junction Splice Boxes
These patch boxes and splice enclosures are manufactured from impact resistant polycarbonate and provide a cost effective means of breaking out fibres from multicore cables prior to termination or splicing. The boxes provide protection agains...
AMP Corelink Mechanical Splice
Re-usable mechanical splices for the Corelink system...
Splice Holder for Corelink Splices
31,8 x 61,0 mm Elastomer holder for 6 or 12 Corelink splices. Designed for mounting in splice boxes or distribution boxes....
3M Hot Melt Connectors and Accessories
The 3M Hot Melt termination system is renowned worldwide for its consistency, ease of use and high performance. A wide range of connectors are available each pre loaded with adhesive which is activated when inserted into the specifcially desi...
Fibre Splice Tray
The Excel fibre Spice tray is designed to manage up to 12 fibres per tray limiting the bend radius of the optical ensuring peak performance.
Cable Glands with Strain Relief
Compression glands are used to provide strain relief for cables as they enter patch panels and wall boxes. The glands are resistant to both benzene and oil. The gland is supplied with a lock nut as standard. Cable diameters from 2.6mm to 25mm...
Expotek Heat Curing Epoxy
EPO-TEK 353ND is a two part heat curing Epoxy which can be used with any type of connector. To ensure the correct mix ratio the Epoxy is supplied in a Bi Pack containing measured amounts of resin and hardener. Removal of the plastic divider a...
Lapping Film
A complete range of high quality lapping film for connector polishing. Sheet size is 250 x 280mm....
Blanking Plugs
Blanking plugs can be used in part loaded panels to ensure a tidy and professional installation....
