Blown Fibre System
Prysmian Sirocco Direct Install Cable (Duct)
<p>Assemblies of PE tubes, each with low friction performance suitable for fibre blowing. The tube bundle is surrounded by a layer of moisture-barrier aluminium tape (shown green for clarity) and a flexible sheath of black PE. These products ...
.jpg)
Prysmian Sirocco Internal Tube Assembles (LSOH)
<p>Assemblies of LFH tubes, each with low friction performance for fibre blowing. The tube bundle is surrounded with a sheath of Natural LFH material, giving excellent performance in a fire scenario.
Prysmian Sirocco Accessories
Accessories for the Prysmian Sirocco Blown Fibre System
Prysmian Sirocco Blown Fibre Gas Seal Unit
The Blown Fibre Gas Seal Unit (BFGSU) is typically used in business premises or entry to apartment blocks. This is a wall mounted unit that is positioned internally at the cable entry point. Incoming external blown tube cables are connected t...
Prysmian Sirocco DB1 Connection Kit
The DB1 Connection Kit is used to connect two DB1 Blown Tube cables together. The cables are connected using a standard 5-5mm tube connector. A length of protective conduit is then used to protect the joint and the conduit is sealed to the ca...
Prysmian Sirocco Blown Fibre Units (EPFU)
Optical fibre units EPFU (Enhanced Performance Fibre Units) specifically engineered for Blown Fibre applications. The fibres are contained within a soft inner acrylate layer which cushions the fibres, an outer harder layer which protects the ...
Prysmian Sirocco Internal TDU
The Internal Tube Distribution Units (TDU’s) are used as a 3 or 4 way distribution point for tube management for vertical / horizontal connections of blown fibre tube cables. The TDU’s allow the interception of a Blown Fibre Cable to be conne...
Prysmian Sirocco Tube Distribution Closure (TDC) MK II Accessories & Tools
A range of tools and accessories for the Prysmian Sirocco Sirocco Tube Distribution Closure
Prysmian Sirocco Tube Distribution Closure (TDC) MK II
The Sirocco Tube Distribution Closure (TDC) MK II is a direct bury inline sealed closure (IP 68 Rated) designed for intercepting a blown fibre tube cable / duct assembly to a allow multiple spur-off's to smaller blown fibre tube cables or ducts.
Prysmian Sirocco Blown Tube Patch Shelf
The 19 inch Blown Tube Patch Shelf provides a solution for connecting up to 48 blown fibre tubes of 5mm in diameter. The shelf is 3U in height and can be mounted into a 19'' rack or street-side cabinet. The connectors inside the shelf are gas...
